What polymer raw materials does Birka supply in Iraq?

Birka supplies certified prime virgin Polypropylene (PP), Polyethylene (HDPE, LDPE, LLDPE, PE100), Suspension PVC (K57, K65, K67, K70), Industrial Pigments, Rutile TiO2 Masterbatches, and Bitumen Penetration Grades (60/70, 80/100).

Where is Birka central warehouse located?

Birka central buffer warehouse is located in Sulaymaniyah, Iraq, with rapid delivery routes serving Erbil, Baghdad, Basra, Kirkuk, and all Iraqi governorates.

How fast can I receive an official quotation from Birka?

Birka provides formal stamped proforma commercial quotations within 24 hours of receiving inquiry specifications.

Are all batches tested with a Certificate of Analysis (CoA)?

Yes. 100% of lots dispatched by Birka are accompanied by an official producer Certificate of Analysis verifying MFI, density, tensile strength, and environmental stress crack resistance under ISO and ASTM standards.

Back to All Technical Guides

Infrastructure & Pipes7 min read•2026-08-25

HDPE PE100 Pipe-Grade Specifications & MRS 10.0 MPa Rating Explained

Infrastructure Sourcing Desk

Birka Civil & Piping Materials Specialist

Technical Review Passed

PE100 is the benchmark bimodal high-density polyethylene for municipal potable water and natural gas transmission. Understand the critical metrics required for ISO 4427 compliance in Iraq.

1. What Defines a True PE100 Resin?

The designation PE100 originates from the Minimum Required Strength (MRS) classification defined in ISO 9080. A PE100 resin must demonstrate a 97.5% lower confidence limit of tensile hoop strength of at least 10.0 MPa at 20°C over a 50-year extrapolated lifespan.

Bimodal polymerization technology combines low molecular weight chains (for smooth extruder throughput) with ultra-high molecular weight chains (for crack arresting strength and hydrostatic burst containment).

2. Carbon Black & UV Stability Requirements

Under ISO 4427-1, pipe-grade black PE100 must contain 2.0% to 2.5% Carbon Black with particle size below 25 nm and a dispersion rating ≤ Grade 3 (ISO 18553).

Pre-compounded refinery resins supplied by Birka guarantee complete microscopic dispersion, preventing surface moisture voids and thermal photo-oxidation during outdoor pipe storage in high-temperature Iraqi regions.

Related In-Stock Materials in Sulaymaniyah

Polyethylene (PE) Specs Polypropylene (PP) Specs

Need Batch Pricing for These Resins?

Receive an official stamped commercial proforma invoice within 24 hours.

Request Quotation